Maxim Integrated (MAX9122EUE+) LVDS Driver, LVDS Receiver, 15 mA

Product Overview The MAX9122EUE+ is a quad LVDS line receiver with integrated termination and flow-through pinout in 16 pin TSSOP package. It receive data at speeds up to 500Mbps (250MHz) over controlled impedance media of approximately 100 ohm, the transmission media may be printed circuit (PC) board traces or cables. The device accepts four LVDS differential inputs and translates them to LVCMOS outputs. The device supports a wide common mode input range of 0.05V to 2.35V allowing for ground potential differences and common mode noise between the driver and the receiver. A fail-safe feature sets output high when inputs are open or when inputs are undriven and shorted or parallel terminated. It is used in digital copiers, laser printers, cellular phone base stations, add/drop muxes, digital cross-connects, DSLAMs, network switches/routers, backplane interconnect and clock distribution. Supply voltage range is 3V to 3.6V Operating temperature range from -40°C to 85°C Flow-through pinout, simplifies PC board layout & reduces crosstalk Pin compatible with DS90LV048A Maximum pulse skew of 300ps Conform to ANSI TIA/EIA-644 LVDS standard Maximum differential channel to channel skew of 400ps Integrated termination eliminates four external resistors Applications Communications & Networking Product Information Device Type: LVDS Receiver Peak-to-Peak Jitter Max: - Supply Current Max: 15mA Operating Temperature Min: -40°C Operating Temperature Max: 85°C Supply Voltage Min: 3V Supply Voltage Max: 3.6V Driver Case Style: TSSOP No. of Pins: 16Pins Signaling Rate: 500Mbps Signal Input Type: LVDS Output Level Type: LVCMOS ESD HBM: 8kV Product Range: - Automotive Qualification Standard: - MSL: MSL 1 - Unlimited