Texas Instruments (2837338) USB Interface, 3 V, 3.6 V, WQFN, 40 Pins

USB Interface, VESA USB Type-C Crosspoint Switch, USB 3.1, 3 V, 3.6 V, WQFN, 40 Pins Product Overview The TUSB546AI-DCIRNQT from Texas Instruments is a VESA USB Type-C™ DP Alt mode linear re-driver crosspoint switch in 40 pin WQFN package. This switch supporting USB 3.1 data rates up to 5Gbps and DisplayPort 1.4 up to 8.1Gbps for downstream facing port (host). The device is used for configurations C, D, E and F from the VESA DisplayPort Alt mode on USB Type-C Standard Version 1.1. This protocol-agnostic linear re-driver is also capable of supporting other USB Type-C Alt mode interfaces. It provides several levels of receive linear equalization to compensate for inter symbol interference (ISI) due to cable and board trace loss. It is used in tablets, notebooks, desktops and docking stations. Operates on a single 3.3V supply Ultra-low power architecture Linear re-driver with up to 14dB equalization Transparent to DisplayPort link training Automatic LFPS De-Emphasis control to meet USB 3.1 certification requirements Configuration through GPIO or I2C Intel proprietary DCI capability on USB Type-C™ for closed chassis debugging Hot-plug capable 4mm x 6mm nom body size, 0.4mm pitch Operating temperature of -40°C to 85°C Product Information USB IC Type: VESA USB Type-C Crosspoint Switch USB Standard: USB 3.1 Supply Voltage Min: 3V Supply Voltage Max: 3.6V Interface Case Style: WQFN No. of Pins: 40Pins Data Rate: 8.1Mbps No. of Ports: 1 Port Operating Temperature Min: -40°C Operating Temperature Max: 85°C Product Range: - MSL: MSL 2 - 1 year