Texas Instruments (MAX3222CDBR) Transceiver RS232, 2 Drivers

Product Overview The MAX3222CDBR is a RS-232 multichannel Line Driver/Receiver with ±15kV ESD protection pin-to-pin (serial-port connection pins, including GND). The device meets the requirements of TIA/EIA-232-F and provides the electrical interface between an asynchronous communication controller and the serial-port connector. The charge pump and four small external capacitors allow operation from a single 3 to 5.5V supply. The device operates at data signalling rates up to 250kbps and a maximum of 30V/µs driver output slew rate. It can be placed in the power-down mode by setting PWRDOWN low, which draws only 1µA from the power supply. When the device is powered down, the receivers remain active while the driver is placed in the high-impedance state. Also, during power-down, the onboard charge pump is disabled, V+ is lowered to VCC and V- is raised toward GND. Receiver outputs also can be placed in the high-impedance state by setting EN high. Alternative high-speed pin-compatible device (1Mbps) for SNx5C3222 1µA Typical Low standby current Green product and no Sb/Br Applications Portable Devices, Computers & Computer Peripherals Product Information Device Type: RS232 Transceiver IC Interface Type: RS232 No. of Drivers: 2Drivers No. of Receivers: 2Receivers Supply Voltage Min: 3V Supply Voltage Max: 5.5V Driver Case Style: SSOP No. of Pins: 20Pins Operating Temperature Min: 0°C Operating Temperature Max: 70°C Product Range: - Automotive Qualification Standard: - MSL: MSL 1 - Unlimited