FTDI (2081332) USB Interface, USB 2.0, 2.97 V, 5.5 V, SSOP, 24 Pins

USB Interface, USB-FIFO, USB 2.0, 2.97 V, 5.5 V, SSOP, 24 Pins Product Overview The FT240XS is an USB 2.0 Full-speed IC, offers a compact bridge to 8-bit wide FIFO interfaces. The device is a FIFO, capable of operating up to 1Mbps, with low power consumption (8mA). The IC includes the complete FT-X series feature set and enables USB to be added into a system design quickly and easily over a 8-bit wide FIFO interface. Entire USB protocol handled on chip, no USB specific firmware programming required Fully integrated 2048-byte MTP memory for storing device descriptors and CBUS I/O configuration Fully integrated clock generation with no external crystal required Data transfer rates to 1Mbps 512-byte receive buffer and 512-byte transmit buffer utilising buffer smoothing technology FTDI's royalty-free virtual com port (VCP) and direct (D2XX) drivers Configurable CBUS I/O pins Transmit and receive LED drive signals Synchronous and asynchronous bit bang interface options with RD# and WR# strobes Battery charger detection Device supplied pre-programmed with unique USB serial number Supports bus powered, self powered and high-power bus powered USB configurations Integrated +3.3V level converter for USB I/O True 3.3V CMOS drive output and TTL input Configurable I/O pin output drive strength Integrated power-on-reset circuit Low USB bandwidth consumption UHCI/OHCI/EHCI host controller compatible USB 2.0 full-speed compatible Extended operating temperature range Product Information USB IC Type: USB-FIFO USB Standard: USB 2.0 Supply Voltage Min: 2.97V Supply Voltage Max: 5.5V Interface Case Style: SSOP No. of Pins: 24Pins Data Rate: 1Mbps No. of Ports: - Operating Temperature Min: -40°C Operating Temperature Max: 85°C Product Range: - MSL: MSL 3 - 168 hours