Texas Instruments (SN74HCT125N) Buffer, 74HCT125, 4.5 V to 5.5 V, DIP-14

Product Overview The SN74HCT125N is a quadruple Bus Buffer Gate features independent line drivers with 3-state outputs. Each output is disabled when the associated output-enable (OE)\ input is high. To ensure the high-impedance state during power up or power down, OE\ should be tied to VCC through a pull-up resistor and the minimum value of the resistor is determined by the current-sinking capability of the driver. Inputs are TTL-voltage compatible High-current 3-state outputs drive bus lines or buffer memory address registers High-current outputs drive up to 15 LSTTL loads 80µA maximum ICC low power consumption 12ns typical Propagation delay (tpd) ±6mA Output drive at 5V 1µA maximum Low input current Applications Industrial, Automation & Process Control, Signal Processing Product Information Logic Device Type: Buffer, Non Inverting Logic Family / Base Number: 74HCT125 Logic Case Style: DIP No. of Pins: 14Pins Supply Voltage Min: 4.5V Supply Voltage Max: 5.5V Logic IC Family: 74HCT Logic IC Base Number: 74125 Operating Temperature Min: -40°C Operating Temperature Max: 85°C Product Range: - Automotive Qualification Standard: - MSL: -