Maxim Integrated (MAX1485CUB+) Transceiver RS422, RS485,

Product Overview The MAX1485CUB+ is a software selectable half/ full duplex, slew rate limited RS485/RS422 transceiver in 10 pin µMAX package. It can be configured as 14 pin full duplex transceiver via jumpers between receiver and transmitter lines or two 8 pin half duplex transceivers which require an additional inverter logic gate for software selectability. This reduced slew rate driver minimizes EMI and reduce reflections caused by improperly terminated cables allowing error-free data transmission up to 250Kbps. The driver output is short circuit current limited and is protected against excessive power dissipation by thermal-shutdown circuitry that places the driver outputs into a high impedance state. The receiver input has a fail-safe feature that provides a logic-high output if the input is open circuit. Supply voltage range is 4.75V to 5.25V Operating temperature range from 0°C to 70°C One driver and one receiver 1/8 unit load receiver input impedance Features driver enable function Allows up to 256 transceivers on the bus Quiescent current is 300µA Product Information Device Type: Transceiver IC Interface Type: RS422, RS485 No. of Drivers: 1Drivers No. of Receivers: 1Receivers Supply Voltage Min: 4.75V Supply Voltage Max: 5.25V Driver Case Style: µMAX No. of Pins: 10Pins Operating Temperature Min: 0°C Operating Temperature Max: 70°C Product Range: - Automotive Qualification Standard: - MSL: MSL 1 - Unlimited IC Generic Number: MAX1485