Texas Instruments (SN74HC125N) Buffer, 74HC125, 2 V to 6 V, DIP-14

Product Overview The SN74HC125N is a quadruple Bus Buffer Gate features independent line drivers with 3-state outputs. It is designed for 2 to 6V VCC operation. Each output is disabled when the associated output-enable (OE) input is high. To ensure the high-impedance state during power up or power down, OE should be tied to VCC through a pull-up resistor and the minimum value of the resistor is determined by the current-sinking capability of the driver. High-current 3-state outputs interface directly with system bus or can drive up to 15 LSTTL loads 80µA maximum ICC low power consumption 11ns typical Propagation delay (tpd) ±6mA Output drive at 5V 1µA maximum Low input current Product Information Logic Device Type: Buffer, Non Inverting Logic Family / Base Number: 74HC125 Logic Case Style: DIP No. of Pins: 14Pins Supply Voltage Min: 2V Supply Voltage Max: 6V Logic IC Family: 74HC Logic IC Base Number: 74125 Operating Temperature Min: -40°C Operating Temperature Max: 85°C Product Range: - Automotive Qualification Standard: - MSL: -