Analog Devices (MAX487EPA+) Transceiver RS422, RS485

Product Overview The MAX487EPA+ is a low power, slew rate limited RS485/RS422 transceiver in 8 pin DIP package. It contains one driver and one receiver. This reduced slew rate driver minimizes EMI and reduces reflections caused by improperly terminated cables, thus allowing error free data transmission up to 250Kbps. The driver is short circuit current limited and is protected against excessive power dissipation by thermal shutdown circuitry that places the driver outputs into a high impedance state. It features fail-safe circuitry which has a logic high receiver output when the receiver input is open. Supply voltage range from 4.75V to 5.25V Operating temperature range from -40°C to 85°C Designed for half duplex communication Low current shutdown mode consume 0.1µA current Features receiver/driver enable function Quiescent current is 120µA Quarter unit load receiver input impedance Allows up to 128 transceivers on the bus Applications Communications & Networking, Industrial Product Information Device Type: Transceiver IC Interface Type: RS422, RS485 No. of Drivers: 1Drivers No. of Receivers: 1Receivers Supply Voltage Min: 4.75V Supply Voltage Max: 5.25V Driver Case Style: DIP No. of Pins: 8Pins Operating Temperature Min: -40°C Operating Temperature Max: 85°C Product Range: - Automotive Qualification Standard: - MSL: MSL 1 - Unlimited IC Generic Number: MAX487E