Maxim Integrated (MAX488CPA+) RS485/RS422, Transmitter/Receiver

Product Overview The MAX488CPA+ is a low-power Slew-rate-limited Transceiver for RS-485 and RS-422 communication. Each part contains one driver and one receiver. The MAX488 feature reduced slew-rate drivers that minimize EMI and reduce reflections caused by improperly terminated cables, thus allowing error-free data transmission up to 250kbps. This transceiver draws between 120µA and 500µA of supply current when unloaded or fully loaded with disabled drivers. All parts operate from a single 5V supply. Drivers are short-circuit current limited and are protected against excessive power dissipation by thermal shutdown circuitry that places the driver outputs into a high-impedance state. The receiver input has a fail-safe feature that guarantees a logic-high output if the input is open circuit. This is designed for full-duplex applications. 0.12mA Typical low power 250kbps Data rate 120µA Quiescent current 32 Number of receivers on bus 14 Pin count Industrial-Control Local Area Networks; Level Translators; Low-Power RS-422 Transceivers; Low-Power RS-485 Transceivers; Transceivers for EMI-Sensitive Applications Applications Communications & Networking, Industrial Product Information Device Type: Line Driver / Receiver IC Interface Type: RS422, RS485 No. of Drivers: 1Drivers No. of Receivers: 1Receivers Supply Voltage Min: 4.75V Supply Voltage Max: 5.25V Driver Case Style: DIP No. of Pins: 8Pins Operating Temperature Min: 0°C Operating Temperature Max: 70°C Product Range: - Automotive Qualification Standard: - MSL: -