Multicomp Pro (MP005890) Eurocard PCB Board Epoxy Glass Composite

Product Information: Board Type: Eurocard Board Material: Epoxy Glass Composite Hole Diameter: 1.02mm External Height: 220mm External Width: 233.4mm Board Thickness: 1.6mm Description: This series of General-Purpose Prototyping Eurocard Circuit Boards comprises single, double-sided and extended Eurocards single (3U) and double (6U) height prototyping pcb’s. These matrix boards are formatted for total flexibility - for general purpose applications and various component packing densities, allowing any assembly and wiring techniques, i.e. wire wrapping, or discrete component wiring. There are no restrictions to layout or wiring. IC’s are accepted in either plane. Supply lines are determined by the User. All The double-sided boards have a colander ground plane for maximum screening. Octagonal pads offer a large solder surface. Identification of component and wiring point locations is provided by silk screen references on the component side and hole matrix identification grid references on the solder side of the boards. Features: - General purpose prototyping PCB - With colander ground plane for maximum screening - Octagonal style pads - Used with wire wrapping or discrete component wiring - DIN 41612 connector mounting holes one end – 32/64/96 way - Silkscreen reference component side - These double height boards have a 3.81mm gap in the centre of the board - Grid references - Material epoxy glass or FR4 - Hole matrix 2.54mm × 2.54mm - Hole size 1.02mm - Board thickness 1.6mm - Copper Thickness 1 oz/ft2 or 35 microns or 305g/m2 - Protective Coating OSP - organic solderability preservatives (anti tarnish)