Ideal-Tek (34A.SA) Tweezer Precision Straight Flat Stainless Steel

Product Information: Tweezer Type: High Precision Tweezer Tip Type: Straight, Flat Overall Length: 120mm Tip Style: Style 34A Tweezer Body Material: Stainless Steel Body Tweezer Tip Material: Stainless Steel Tip Product Range: - Product Overview: The 34A.SA from Ideal-Tek is an anti-magnetic anti-acid stainless steel high precision tweezer. This tweezer is handcrafted to have perfect tip symmetry and balance along with polished edges and superior no-scratch/antiglare satin finish. It contains from 16.5 to 18.5 wt% chromium and has important quantities of nickel and molybdenum as additional alloying elements. This high precision tweezer is generally used where corrosion resistance and toughness are primary requirements. It is used by electronic industry, watch makers, jewellers, laboratory, microscopy preparation, sample handling, precision manufacturing and medical applications in moderately aggressive chemical environments. - Overall length is 4 3 - 4" (120mm), smooth to hold delicate parts - Low carbon austenitic steel (material number 1.4435, DIN X2CrNiMo18-14-3, AISI number 316L) - Non-magnetizable - Good corrosion resistance to most chemicals, salts and acids - Annealed state, 8.0g - cm³ density, <=215 hardness HB30, 79 hardness rockwell B - 500 to 700Mpa tensile strength (ultimate), 290 tensile strength (yield), <=200Mpa 0.2% yield stress - 40% elongation, break and 200Gpa modulus of elasticity - Specific heat capacity is 0.50J - (g·K), thermal conductivity is 15W - (m·K) - Continues use temperature is 350°C and maximum service temperature is 925°C - Resistivity is 0.75 E-4 oh