Duratool DT000089 Magnifier LED - 5 Dioptre Magnification 15w - UK Plug

The DT000089 from Duratool is a magnifying lamp. Ideal for engineers to view micro components or PCB or medical persons or beauticians to light or magnify. Supplied with electronic ballast.

Bright and stable light, no flash feeling, and does not harm eyesight
Integration of magnifying and lighting
5inch glass lens, 5D dioptre
80 pieces 15W LED light source, table base mount
Environment temperature range from -20°C to +40°C, <=95% humidity
Duratool products are rated 4.1 out of 5 stars

Applications
Lighting, LED Lighting, Laboratory, Utilities
Footnotes
Indoor use only.
Warnings
Never look into light sources, such as LED lamps or lasers, through the magnifying glass. This may result in eye injuries, due to the optical interaction. Market demand for this product has caused an extension in lead times. Delivery dates may fluctuate. Product exempt from discounts.

Features
- Ideal for engineers to view micro components or PCB, or medical person or beautician to light or magnify.
- Integration of magnifying and lighting.
- Bright and stable light, no flash feeling, no harm to eyesight.
- Supplied with electronic ballast

Specifications
Lens size: 5 inch
Lens material: Glass
Diopter: 5D
Light Sources: 80pcs LED 15W
Standard Mount: Table Base

Operation Instructions
- Take the lamp out of the packaging and place it on a level, even surface.
- Adjust the lamp holder and the light arm as desired.
- Switch on the LED magnifying lamp, then start your operation.
Important for safe use
- Indoor use only.
- Environment temperature: -20°C to +40°C
- Humidity: ?95%

Attention
- The product can only be used indoors, never outdoors. Do not expose to moisture, under any circumstances.
- Do not look directly into the light source, when the lamp is in operation.
- Never look into light sources, such as LED lamps or lasers, through the magnifying glass. This may result in eye injuries,
due to the optical interaction.
- Always cover the magnifying glass with a plastic cover when it’s not in use, otherwise there is a risk of fire due to the burning
glass effect in direct sunshine.
- Never leave the lamp without supervision when it is in use.
- Check the lamp for damage from time to time. Don’t touch the device if the lamp or the main adaptors show any signs of
damage. Please switch off the appropriate mains socket and then carefully pull the mains plug from the socket then take it
to a specialist workshop.

Maintenance
- Remove loose particles with clean compressed air and then brush off remaining residues with a soft fine brush.
- Clean the surface with a lens cleaning cloth or a clean, soft, and lint-free cloth. To remove fingerprints and other fat residues,
the cloth can be moistened with water or a lens-cleaning solution.
- Do not use acid, alcohol, or other solvents or rough, fuzzy cloths. Avoid excessive cleaning and extorting too much pressure.
- Never touch the lens with your fingernails or other sharp objects