Texas Instruments (SN65LVDT388ADBT) Differential Receiver IC, 630 Mbps

Product Overview The SN65LVDT388ADBT is an octal differential Line Receiver implements the electrical characteristics of low-voltage differential signalling (LVDS). This signalling technique lowers the output voltage levels of 5V differential standard levels (such as EIA/TIA-422B) to reduce the power, increase the switching speeds and allow operation with a 3V supply rail. Any of the differential receivers provides a valid logical output state with a ±100mV differential input voltage within the input common-mode voltage range. The input common-mode voltage range allows 1V of ground potential difference between two LVDS nodes. Additionally, the high-speed switching of LVDS signals almost always requires the use of a line impedance matching resistor at the receiving end of the cable or transmission media. The LVDT products eliminate this external resistor by integrating it with the receiver. Open-circuit failsafe Flow-through pin-out Integrated 110R line termination resistors on LVDT products Bus-terminal ESD exceeds 15kV 2.6ns Typical propagation delay time 100ps Typical output skew <1ns Part-to-part skew 630Mbps Signalling rate Green product and no Sb/Br Applications Wireless, Communications & Networking, Computers & Computer Peripherals Product Information Device Type: Differential Receiver IC Interface Type: LVDS Supply Voltage Min: 3V Supply Voltage Max: 3.6V Driver Case Style: TSSOP No. of Pins: 38Pins Operating Temperature Min: -40°C Operating Temperature Max: 85°C Product Range: - MSL: MSL 2 - 1 year