Onsemi (MC100EL16DG) Differential ECL Receiver, ECL Output

Product Overview The MC100EL16DG is an ECL Differential Receiver functionally equivalent to the E116 device with higher performance capabilities. With output transition times significantly faster than the E116 the EL16 is ideally suited for interfacing with high frequency sources. The VBB pin, an internally generated voltage supply, is available to this device only. For single-ended input conditions, the unused differential input is connected to VBB as a switching reference voltage. VBB may also re-bias AC coupled inputs. When used, decouple VBB and VCC via a 0.01µF capacitor and limit current sourcing or sinking to 0.5mA. When not used, VBB should be left open. Under open input conditions (pulled to VEE) internal input clamps will force the Q output low. The 100 series contains temperature compensation. Internal input pull down resistors Meets or exceeds JEDEC spec EIA/JESD78 IC latch-up test Moisture sensitivity level 1 190ps Propagation delay >1kV HBM and >100V MM ESD protection VC=4.2 to 5.7V with VEE=0V PECL mode operating range VCC=0V with VEE=-4.2 to -5.7V NECL mode operating range UL94V-0 at 0.125 in, oxygen index 28 to 34 Flammability rating 47 devices Transistor count Applications Clock & Timing Product Information Device Type: Differential Receiver Output Level Type: ECL Signaling Rate: - Supply Voltage Min: 4.2V Supply Voltage Max: 5.7V Driver Case Style: SOIC No. of Pins: 8Pins Operating Temperature Min: -40°C Operating Temperature Max: 85°C Product Range: - MSL: -