Microchip (MCP2003-E/SN) LIN Transceiver, 20 Kbaud, 6V to 27V Supply

Product Overview The MCP2003-E/SN is a LIN J2602 Transceiver provides a bi-directional, half-duplex communication, physical interface to automotive and industrial LIN systems to meet the LIN bus specification revision 2.1 and SAE J2602. The device is short-circuit and over-temperature protected by internal circuitry. The device has been specifically designed to operate in the automotive operating environment and will survive all specified transient conditions while meeting all of the stringent quiescent current requirements. It provides a physical interface between a microcontroller and a LIN bus. This device will translate the CMOS/TTL logic levels to LIN logic level and vice versa. It is intended for applications with serial bus speeds up to 20kbaud. 43V Load dump protected Very low high electromagnetic immunity (EMI) Very high electrostatic discharge (ESD) immunity Very high immunity to RF disturbances meets stringent OEM requirements -40 to +125°C Extended temperature range Interface to PIC® MCU EUSART and standard USARTs LIN bus pin - Internal pull-up resistor and diode Automatic thermal shutdown Low-power mode - Receiver monitoring bus and transmitter off (~= 5µA) Applications Communications & Networking, Automotive, Industrial Product Information Output Voltage: 27V Output Current: 200mA Supply Voltage Min: 6V Supply Voltage Max: 27V Baud Rate: 20Kbaud Interface Case Style: SOIC No. of Pins: 8Pins Product Range: - Automotive Qualification Standard: AEC-Q100 MSL: MSL 1 - Unlimited