Maxim Integrated (MAX9205EAI+) SerDes, Serialiser, 400 Mbp

Product Overview The MAX9205EAI+ is a 10bit bus LVDS serializer in 28 pin SSOP package. The serializer transform 10bitwide parallel LVCMOS/LVTTL data into a serial high speed bus low voltage differential signalling data stream. The serializers typically pair with deserializers like the MAX9206 which receive the serial output and transform it back to 10-bit-wide parallel data. The MAX9205 transmit serial data at speeds up to 400Mbps and 660Mbps over PCB traces or twisted-pair cables. Since the clock is recovered from the serial data stream, clock to data and data to data skew that would be present with a parallel bus are eliminated. The serializers require no external components and few control signals. The input data strobe edge is selected by TCLK_R/F. Power down is used to save power when the device is not in use. Upon power-up, a synchronization mode is activated, which is controlled by two SYNC inputs, SYNC1 and SYNC2. The MAX9205 can lock to a 16MHz to 40MHz system clock. Supply voltage range is 3V to 3.6V Operating temperature range from -40°C to 85°C Standalone serializer (vs. SERDES) ideal for unidirectional links Framing bits for deserializer resync allow hot insertion without system interruption LVDS serial output rated for point to point and bus applications Low 34mA supply current Programmable active edge on input latch Pin compatible upgrades to DS92LV1021 and DS92LV1023 Applications Communications & Networking Product Information SERDES Function: Serialiser Data Rate: 400Mbps IC Input Type: LVTTL IC Output Type: LVDS Driver Case Style: SSOP No. of Pins: 28Pins Supply Voltage Min: 3V Supply Voltage Max: 3.6V No. of Inputs: 10Inputs No. of Outputs: 1Outputs Product Range: - Automotive Qualification Standard: - MSL: MSL 1 - Unlimited