Maxim Integrated (MAX9129EUE+) LVDS Driver, LVDS Driver, 70 mA

Product Overview The MAX9129EUE+ is a quad bus LVDS driver with flow-through pin-out in 16 pin TSSOP package. This quad bus low voltage differential signalling is designed to drive a heavily loaded multipoint bus with controlled transition times for reduced reflections. It accepts four LVTTL/LVCMOS input levels and translates them to output levels of 250mV to 450mV (standard LVDS levels) into a 27ohm load at speeds up to 200Mbps (100MHz). The power-on reset ensures that all four outputs are disabled and high impedance during power up and power down. The flow-through pin-out simplifies PC board layout and reduces crosstalk by keeping the LVTTL/LVCMOS inputs and BLVDS outputs separated. It is used in cell phone base stations, add/drop muxes, digital cross-connects, DSLAMs, network switches/routers, clock distribution and backplane interconnect. Supply voltage range is 3V to 3.6V Operating temperature range from -40°C to 85°C 1ns (0% to 100%) minimum transition time reduces reflections Enable pins for high-impedance output High impedance outputs when powered off Glitch-free power-up and power-down Hot swappable Maximum differential output voltage of 450mV Maximum offset voltage of 1.375V Maximum supply current of 70mA at RL = 27ohm Applications Communications & Networking Product Information Device Type: LVDS Driver Peak-to-Peak Jitter Max: - Supply Current Max: 70mA Operating Temperature Min: -40°C Operating Temperature Max: 85°C Supply Voltage Min: 3V Supply Voltage Max: 3.6V Driver Case Style: TSSOP No. of Pins: 16Pins Signaling Rate: 200Mbps Signal Input Type: LVTTL, LVCMOS Output Level Type: LVDS ESD HBM: 8kV Product Range: - Automotive Qualification Standard: - MSL: MSL 1 - Unlimited