Texas Instruments (SN65LVDS049PW) LVDS Driver, Differential Line Receiver

Product Overview The SN65LVDS049PW is a dual high-speed Differential Driver and Receiver uses low-voltage differential signaling (LVDS) to achieve signaling rates as high as 400Mbps. The driver and receiver electrical interfaces are compliant to the TIA/EIA-644-A standard. The intended application of this device and signaling technique is for point-to-point baseband data transmission over controlled impedance media of approximately 100R characteristic impedance. The transmission media may be printed-circuit board traces, backplanes or cables. The ultimate rate and distance of data transfer is dependent upon the attenuation characteristics of the media, the noise coupling to the environment and other application specific characteristics. Flow-through pin-out High-impedance disable for all outputs Internal failsafe biasing of receiver inputs High-impedance bus pins on power-down 50ps Driver channel-to-channel skew (typical) 50ps Receiver channel-to-channel skew (typical) 1.4ns Driver propagation delay (typical) 1.9ns Receiver propagation delay (typical) Green product and no Sb/Br Applications Clock & Timing, Communications & Networking, Computers & Computer Peripherals Product Information Device Type: Differential Line Driver / Receiver Peak-to-Peak Jitter Max: - Supply Current Max: 35mA Operating Temperature Min: -40°C Operating Temperature Max: 85°C Supply Voltage Min: 3V Supply Voltage Max: 3.6V Driver Case Style: TSSOP No. of Pins: 16Pins Signaling Rate: 400Mbps Signal Input Type: LVDS Output Level Type: LVDS ESD HBM: 10kV Product Range: - Automotive Qualification Standard: - MSL: MSL 1 - Unlimited