NXP (MC33897CTEF) CAN Bus, CAN, Serial, 5 V, 26.5 V, NSOIC

Product Overview The MC33897CTEF is a single wire CAN Transceiver provides a physical layer for digital communication using a carrier sense multiple access/collision resolution (CSMA/CR) data link operating over a single wire medium. This is more commonly referred to as single-wire controller area network (SWCAN). It operates directly from a vehicle's 12V battery system or a broad range of DC-power sources. It can operate at low or high (33.33 or 83.33kbps) data rates. A high-voltage wake-up feature allows the device to control the regulator used in support of the MCU and other logic. The device includes a control pin that can be used to put the module regulator into sleep mode. The presence of a defined wake-up voltage level on the bus will reactivate the control line to turn the regulator and the system back ON. Wave shaping for low electromagnetic interference (EMI) Detects and automatically handles loss of ground Worst-case sleep mode current of only 60µA Current limit prevents damage due to bus shorts Built-in thermal shutdown on bus output Protected against vehicular electrical transients Under-voltage lockout prevents false data with low battery Applications Signal Processing, Test & Measurement, Automation & Process Control Product Information IC Interface Type: CAN, Serial No. of TX Buffers: - No. of RX Buffers: - Supply Voltage Min: 5V Supply Voltage Max: 26.5V Interface Case Style: NSOIC No. of Pins: 14Pins Operating Temperature Min: -40°C Operating Temperature Max: 125°C Product Range: - Automotive Qualification Standard: - MSL: MSL 3 - 168 hours