Maxim Integrated (MAX3485CPA+) RS485/RS422, 3.3V Transmitter/Receiver

Product Overview The MAX3485CPA+ is a slew-rate-limited Low-power Transceiver for RS-485/RS-422 communication. Each part contains one driver and one receiver. The MAX3485 feature slew-rate-limited drivers that minimize EMI and reduce reflections caused by improperly terminated cables, allowing error-free data transmission at data rates up to 10Mbps. Drivers are short-circuit current limited and are protected against excessive power dissipation by thermal shutdown circuitry that places the driver outputs into a high-impedance state. The receiver input has a fail-safe feature that guarantees a logic-high output if both inputs are open circuit. Operate from a single 3.3V supply - No charge pump Interoperable with +5V logic Slew-rate limited for errorless data transmission 2nA Low-current shutdown mode -7 to +12V Common-mode input voltage range Allows up to 32 transceivers on the bus Industry-standard 75176 pinout Current-limiting and thermal shutdown for driver overload protection Applications Communications & Networking Product Information Device Type: Line Driver / Receiver IC Interface Type: RS422, RS485 No. of Drivers: 1Drivers No. of Receivers: 1Receivers Supply Voltage Min: 3V Supply Voltage Max: 3.6V Driver Case Style: DIP No. of Pins: 8Pins Operating Temperature Min: 0°C Operating Temperature Max: 70°C Product Range: - Automotive Qualification Standard: - MSL: -