Maxim Integrated (MAX481CSA+ ) Transceiver RS422, RS485

Product Overview The MAX481CSA+ is a half-duplex Low-power Transceiver for RS-485/RS-422 communication. Each part contains one driver and one receiver. The driver slew rates of the MAX481 is not limited, allowing them to transmit up to 2.5Mbps. These transceivers draw between 120 and 500µA of supply current when unloaded or fully loaded with disabled drivers. Additionally, the MAX481 have a low-current shutdown mode in which they consume only 0.1µA. All parts operate from a single 5V supply. Drivers are short-circuit current limited and are protected against excessive power dissipation by thermal shutdown circuitry that places the driver outputs into a high-impedance state. The receiver input has a fail-safe feature that guarantees a logic-high output if the input is open circuit. Low-power shutdown Receiver/driver enable 300µA Quiescent current 32 Number of receivers on bus 8 Pin count Industrial-Control Local Area Networks; Level Translators; Low-Power RS-422 Transceivers; Low-Power RS-485 Transceivers; Transceivers for EMI-Sensitive Applications Applications Communications & Networking, Industrial Product Information Device Type: Transceiver IC Interface Type: RS422, RS485 No. of Drivers: 1Drivers No. of Receivers: 1Receivers Supply Voltage Min: 4.75V Supply Voltage Max: 5.25V Driver Case Style: SOIC No. of Pins: 8Pins Operating Temperature Min: 0°C Operating Temperature Max: 70°C Product Range: - Automotive Qualification Standard: - MSL: MSL 1 - Unlimited