Texas Instruments (SN65HVD24D) Transceiver RS485, 4.5V-5.5V supply

Product Overview The SN65HVD24D is a RS-485 Extended Common-mode Transceiver for use with electrical power inverters. The transceiver in the HVD2x family offer performance far exceeding typical RS-485 devices. In addition to meeting all requirements of the TIA/EIA-485-A standard, the HVD2x family operates over an extended range of common-mode voltage and has features such as high ESD protection, wide receiver hysteresis and failsafe operation. This family of devices is ideally suited for long-cable networks and other applications where the environment is too harsh for ordinary transceivers. This device is designed for bidirectional data transmission on multipoint twisted-pair cables. Example applications are digital motor controllers, remote sensors and terminals. This device combines a 3-state differential driver and a differential receiver, which operate from a single 5V power supply. Common-mode voltage range (-20 to 25V) more than doubles TIA/EIA-485 requirement Reduced unit-load for up to 256 nodes Bus I/O protection to over 16kV HBM Failsafe receiver (bus open, bus shorted and bus idle) Receiver equalization extends cable length, signalling rate 1µA Maximum low standby supply current More than 100mV receiver hysteresis 3Mbps Maximum signalling rate Green product and no Sb/Br Applications Building Automation, Security, HVAC, Power Management, Industrial, Avionics Product Information Device Type: RS485 Transceiver IC Interface Type: RS485 No. of Drivers: 1Drivers No. of Receivers: 1Receivers Supply Voltage Min: 4.5V Supply Voltage Max: 5.5V Driver Case Style: SOIC No. of Pins: 8Pins Operating Temperature Min: -40°C Operating Temperature Max: 85°C Product Range: - Automotive Qualification Standard: - MSL: MSL 1 - Unlimited