Texas Instruments (SN75HVD12P) Differential Transceiver RS485 Driver

Product Overview The SN75HVD12P is a 3.3V Differential Transceiver combines a 3-state differential line driver and differential input line receiver that operate with a single 3.3V power supply. The device is designed for balanced transmission lines and meet or exceed ANSI standard TIA/EIA-485-A and ISO 8482:1993. These differential bus transceivers are monolithic integrated circuits designed for bidirectional data communication on multipoint bus-transmission lines. The drivers and receivers have active-high and active-low enables, respectively, that can be externally connected together to function as direction control. Very low device standby supply current can be achieved by disabling the driver and the receiver. Bus-pin ESD protection exceeds 16kV HBM 1/8 Unit-load Bus-pin short-circuit protection 1µA Typical low-current standby mode Open-circuit idle-bus and shorted-bus failsafe receiver Thermal shutdown protection Applications Motor Drive & Control, Metering, Communications & Networking, Automation & Process Control, Industrial Product Information Device Type: Differential Transceiver IC Interface Type: RS485 No. of Drivers: 1Drivers No. of Receivers: 1Receivers Supply Voltage Min: 3V Supply Voltage Max: 3.6V Driver Case Style: DIP No. of Pins: 8Pins Operating Temperature Min: 0°C Operating Temperature Max: 70°C Product Range: - Automotive Qualification Standard: - MSL: -