Texas Instruments (SN751178N) Differential Driver RS422/RS485, Rail-to-Rail

Product Overview The SN751178N is a dual Differential Driver and Receiver designed for balanced multipoint bus transmission at rates up to 10Mbps. It is designed to improve the performance of full-duplex data communications over long bus lines and meet ANSI standards TIA/EIA-422-B and TIA/EIA-485-A and ITU recommendations V.10 and V.11. The driver outputs provide limiting for both positive and negative currents and thermal-shutdown protection from line-fault conditions on the transmission bus line. The receiver features high input impedance of at least 12kR, an input sensitivity of ±200mV over a common-mode input voltage range of -12 to 12V and typical input hysteresis of 50mV. Failsafe design ensures that if the receiver inputs are open, the receiver outputs always will be high. Driver positive-and negative-current limiting Thermal shutdown protection Driver 3-state outputs 10Mbps Maximum signalling rate 2kV HBM ESD 32 Number of nodes Applications Industrial, Motor Drive & Control, Building Automation, Metering, Power Management, Security Product Information Device Type: Differential IC Interface Type: RS422, RS485 No. of Drivers: 2Drivers No. of Receivers: 2Receivers Supply Voltage Min: 4.75V Supply Voltage Max: 5.25V Driver Case Style: DIP No. of Pins: 16Pins Operating Temperature Min: -20°C Operating Temperature Max: 85°C Product Range: - Automotive Qualification Standard: - MSL: -