Texas Instruments (SN65HVD55DR) Transceiver RS485 Driver, 4.5V-5.5V supply

Product Overview The SN65HVD55DR is a 3-state differential Line Driver and Differential-input Line Receiver for use with DTE and DCE interfaces. Each driver and receiver has separate input and output pins for full-duplex bus communication designs. It is designed for balanced transmission lines and interoperation with ANSI TIA/EIA-485A, TIA/EIA-422-B, ITU-T v.11 and ISO 8482:1993 standard-compliant device. It has active-high driver enables and active-low receiver enables. The high output feature of the SN65HVD5x provides more noise margin than the typical RS-485 driver. The extra noise margin makes applications in long cable and harsh noise environments possible. Glitch-free power-up and power-down bus inputs and outputs Bus idle, open and short-circuit failsafe Bus-pin ESD protection exceeds 15kV HBM <1µA Low-current standby mode 1Mbps Maximum signalling rate Green product and no Sb/Br Applications Metering, Industrial, Building Automation, Communications & Networking Product Information Device Type: Transceiver IC Interface Type: RS485 No. of Drivers: 1Drivers No. of Receivers: 1Receivers Supply Voltage Min: 4.5V Supply Voltage Max: 5.5V Driver Case Style: SOIC No. of Pins: 14Pins Operating Temperature Min: -40°C Operating Temperature Max: 85°C Product Range: - Automotive Qualification Standard: - MSL: MSL 1 - Unlimited