NXP (PCF8577CT/3,118) Display LCD Driver, 32 Segments

Product Overview The PCF8577CT/3 is a LCD Direct/Duplex Driver with I²C-bus interface. The LCD driver which drives up to 32 segments directly or 64 segments in a duplex configuration. The two-line I²C-bus interface substantially reduces wiring overheads in remote display applications. I²C-bus traffic is minimized in multiple IC applications by automatic address incrementing, hardware sub addressing and display memory switching (direct drive mode).To allow partial VDD shutdown, the ESD protection system of the SCL and SDA pins does not use a diode connected to VDD. Low power consumption I²C-bus interface Optimized pinning for single plane wiring Single-pin built-in oscillator Auto-incremented loading across device sub address boundaries Display memory switching in direct drive mode May be used as I²C-bus output expander System expansion up to 256 segments power-ON reset blanks display 0111 0100 I²C-bus address Features and benefits Direct/duplex drive modes with up to 32/64 LCD-segment drive capability per device Operating supply voltage: 2.5 V to 6 V Low power consumption I2C-bus interface Optimized pinning for single plane wiring Single-pin built-in oscillator Auto-incremented loading across device subaddress boundaries Display memory switching in direct drive mode May be used as I2C-bus output expander System expansion up to 256 segments Power-on reset blanks display I2C-bus address: 0111 0100. Applications Industrial Product Information No. of Digits: - No. of Segments: 32 Driver Case Style: VSO No. of Pins: 40Pins Supply Voltage Min: 2.5V Supply Voltage Max: 6V Interface Type: I2C Operating Temperature Min: -40°C Operating Temperature Max: 85°C Product Range: - MSL: MSL 1 - Unlimited