Maxim (2518611) Temperature Sensor IC, Digital, ± 0.5°C, -55 °C, 8 Pins

Temperature Sensor IC, Digital, ± 0.5°C, -55 °C, +125 °C, DIP, 8 Pins Product Overview The DS1620+ is a Digital Thermometer and Thermostat provides 9-bit temperature readings which indicate the temperature of the device. With three thermal alarm outputs, the DS1620 can also act as a thermostat. T-HIGH is driven high if the DS1620's temperature is greater than or equal to a user-defined temperature TH. T-LOW is driven high if the DS1620's temperature is less than or equal to a user-defined temperature TL. T-COM is driven high when the temperature exceeds TH and stays high until the temperature falls below that of TL. User-defined temperature settings are stored in non-volatile memory, so parts can be programmed prior to insertion in a system, as well as used in standalone applications without a CPU. Temperature settings and temperature readings are all communicated to/from the DS1620 over a simple 3-wire interface. Simply adds temperature monitoring and control to any system Converts temperature to digital word in 750ms (maximum) Thermostatic settings are user-definable and non-volatile Data is read from/written via a 3-wire serial interface (CLK, DQ, active-low RST) Applications Automation & Process Control, Industrial, Consumer Electronics, Test & Measurement Product Information IC Output Type: Digital Sensing Accuracy Range: ± 0.5°C Sensing Temperature Min: -55°C Sensing Temperature Max: +125°C Sensor Case Style: DIP No. of Pins: 8Pins Supply Voltage Min: 2.7V Supply Voltage Max: 5.5V Product Range: - MSL: -