Maxim Integrated (2798906) USB Interface, 4 V, 5.5 V, µMAX, 10 Pins

USB Interface, w/ Fault Blanking, Dual USB Switch, 4 V, 5.5 V, µMAX, 10 Pins Product Overview The MAX1823AEUB+T from Maxim Integrated Products is a dual USB switch with fault blanking and autoreset in 10 pin µMAX package. This dual, current limited switch with autoreset specifically made for USB application. The autoreset feature latches the switch off if output is shorted, saving system power. The switch reactivates when short circuit is removed. Each channel has supply current of 720mA and meet USB specifications. Low quiescent supply current (50µA) and standby current (3µA) conserve battery power in portable applications. It has multiple safety features to ensure that the USB port is protected. Built-in thermal overload protection limits power dissipation and junction temperature. Accurate internal current-limiting circuitry protects the input supply against both overload and short-circuits conditions. It is used in USB ports and hubs, notebook and desktop computers, PDAs and palmtop computers and docking stations. Supply voltage range is 4V to 5.5V Operating temperature range from -40°C to 85°C Autoreset feature saves power Built-in 20ms fault blanking, compliant to USB specification, thermal overload protection UL recognized Blocks reverse current in shutdown, 3µA standby current Independent shutdown control, active low Independent active-low FAULT indicator outputs 90mohm typical 120mohm maximum switch on-resistance at TA = 0°C to +85°C 50µA quiescent current (both switches on) Docking Stations; Notebook and Desktop Computers; PDAs and Palmtop Computers; USB Ports and Hubs Applications Signal Processing, Portable Devices, Consumer Electronics Product Information USB IC Type: Dual USB Switch USB Standard: - Supply Voltage Min: 4V Supply Voltage Max: 5.5V Interface Case Style: µMAX No. of Pins: 10Pins Data Rate: - No. of Ports: 2 Port Operating Temperature Min: -40°C Operating Temperature Max: 85°C Product Range: - MSL: MSL 1 - Unlimited