FTDI (2081323) USB Interface, USB 2.0, 2.97 V, 5.5 V, SSOP, 16 Pins

USB Interface, USB-I2C Interface, USB 2.0, 2.97 V, 5.5 V, SSOP, 16 Pins Product Overview USB to I2C interface IC in 16 pin SSOP package Single chip USB to I²C interface Entire USB protocol handled on chip, no USB specific firmware programming required Fully integrated 2048-byte multi-time-programmable (MTP) memory Fully integrated clock generation with no external crystal required 512-byte receive buffer and 512-byte transmit buffer utilising buffer smoothing technology FTDI's royalty-free virtual com port (VCP) and direct (D2XX) drivers Configurable CBUS I/O pin Battery charger detection Device supplied pre-programmed with unique USB serial number Supports bus powered, self powered and high-power bus powered USB configurations Integrated +3.3V level converter for USB I/O True 3.3V CMOS drive output and TTL input Configurable I/O pin output drive strength Integrated power-on-reset circuit Internal 3.3V/1.8V LDO regulators Low operating current of 8mA (typical) and USB suspend current of 125µA (typical) current UHCI/OHCI/EHCI host controller compatible USB 2.0 full-speed compatible Extended operating temperature range -40 to 85⁰C Product Information USB IC Type: USB-I2C Interface USB Standard: USB 2.0 Supply Voltage Min: 2.97V Supply Voltage Max: 5.5V Interface Case Style: SSOP No. of Pins: 16Pins Data Rate: 3.4Mbps No. of Ports: - Operating Temperature Min: -40°C Operating Temperature Max: 85°C Product Range: - MSL: MSL 3 - 168 hours