Nxp (1727706) Microcontroller, MCU, ARM7TDMI, 32bit, 60MHz, 256KB

Product Overview The LPC2292FBD144/01 is a 16-/32-bit Microcontroller based on ARM7TDMI-S CPU with real-time emulation and embedded trace support. A 128-bit wide memory interface and an unique accelerator architecture enable 32-bit code execution at maximum clock rate. For critical code size applications, the alternative 16-bit Thumb mode reduces code by more than 30 % with minimal performance penalty. The device incorporates 256kB embedded high speed flash, 16kB on-chip SRAM, 8-channel 10-bit A/D converter, three 32-bit timers, PWM channels and 112 general-purpose I/O pins. In-system programming (ISP) and In-application programming (IAP) EmbeddedICE RT and embedded trace interfaces Serial interfaces - two UARTs (16C550), fast I2C-bus (400 Kbit/s) and two SPIs Two 32-bit timers, PWM unit, real-time clock and watchdog Vectored interrupt controller with configurable priorities and vector addresses Configurable external memory interface w/up to 4 banks, each up to 16MB and 8/16/32-bit data width Up to 112 general purpose I/O pins (5V tolerant) Up to nine edge or level sensitive external interrupt pins available 60MHz Maximum CPU clock available from programmable on-chip PLL On-chip crystal oscillator with an operating range of 1MHz to 25MHz Power saving modes include Idle and power-down Processor wake-up from power-down mode via external interrupt Individual enable/disable of peripheral functions for power optimization Applications Automation & Process Control, Industrial, Automotive, Medical, Communications & Networking Product Information Product Range: LPC Family LPC2000 Series Microcontrollers Architecture: ARM7TDMI No. of Bits: 32bit CPU Speed: 60MHz Program Memory Size: 256KB RAM Memory Size: 16KB No. of Pins: 144Pins MCU Case Style: LQFP No. of I/O's: 112I/O's Embedded Interface Type: CAN, SPI, UART Supply Voltage Min: 1.65V Supply Voltage Max: 1.95V MCU Family: LPC MCU Series: LPC2000 MSL: MSL 2 - 1 year