Nxp (2094314) Microcontroller, MCU, ARM Cortex-M4, 32bit, 204 MHz, 200 KB

Description: ARM MCU, LPC Family LPC4300 Series Microcontrollers, ARM Cortex-M4, 32bit, 204 MHz, 200 KB Product Information: Product Range: LPC Family LPC4300 Series Microcontrollers Architecture: ARM Cortex-M4 No. of Bits: 32bit CPU Speed: 204MHz Program Memory Size: - RAM Memory Size: 200KB No. of Pins: 144Pins MCU Case Style: LQFP No. of I/O's: 83I/O's Embedded Interface Type: CAN, I2C, I2S, SPI, UART Supply Voltage Min: 2.2V Supply Voltage Max: 3.6V MCU Family: LPC MCU Series: LPC4300 Product Overview: The LPC4320FBD144,551 is a 32-bit Microcontroller based on ARM Cortex-M4 digital signal controller with an ARM Cortex-M0 coprocessor operates at a maximum frequency of 204MHz. The ARM Cortex-M4 core offers single-cycle Multiply-Accumulate and SIMD instructions and a hardware floating-point unit to support signal processing while the M0 coprocessor handles I/O and digital control processing. The device incorporates 200kB internal RAM, one high speed USB 2.0 Host/OTG/Device, 8-channel 10-bit A/D converter, 10-bit D/A converter and 83 general-purpose I/O pins. This device also features peripherals like four UARTs, two I2C, three SPI modules and two I2S. The ARM Cortex-M0 coprocessor is code and tool compatible with the Cortex-M4 core. The Cortex-M0 coprocessor offers with a simple instruction set and reduced code size and hardware multiply is implemented as a 32-cycle iterative multiplier. Built-in memory protection unit (MPU) supporting eight regions Built-in nested vectored interrupt controller (NVIC) Hardware floating-point unit Non-maskable Interrupt (NMI) input JTAG and serial wire debug (SWD), serial trace, eight breakpoints and four watch points Enhanced trace module (ETM) and Enhanced trace buffer (ETB) support System tick timer Crystal oscillator with an operating range of 1MHz to 25MHz 12MHz Internal RC (IRC) oscillator trimmed to 1.5 % accuracy Ultra-low power real-time clock (RTC) crystal oscillator Serial GPIO (SGPIO) interface State configurable timer (SCTimer/PWM) subsystem on AHB Global input multiplexer array (GIMA) Quad SPI flash interface (SPIFI) 10/100T Ethernet MAC with RMII and MII interfaces and DMA support High-speed USB 2.0 Host/Device/OTG & high speed USB 2.0 Host/Device interface External memory controller (EMC) LCD controller with DMA support Secure digital Input/output (SD/MMC) card interface Four general-purpose timer/counters with capture and match capabilities Applications: Motor Drive & Control, Power Management, Logistics, RF Communications, Embedded Design & Development, Industrial, Automation & Process Control, Metering