Maxim Integrated (MAX3430ESA+) Transceiver RS485, 2.97V-3.63V supply

Product Overview The MAX3430ESA+ is a fault-protected fail-safe RS-485 Transceiver features ±80V protection from overvoltage signal faults on communication bus lines. Each device contains one driver and one receiver and the output pins can withstand faults, with respect to ground, of up to ±80V. Even if the faults occur when the transceiver is active, shut down or powered off, the device will not be damaged. The MAX3430 operates from a 3.3V supply and features a slew-rate-limited driver that minimizes EMI and reduces reflections caused by improperly terminated cables, allowing error-free data transmission at data rates up to 250kbps. The MAX3430 has a 1/4-unit-load receiver input impedance allowing up to 128 transceivers on a single bus and features fail-safe circuitry, which guarantees a logic-high receiver output when the receiver inputs are open. Internal slew-rate limiting 250kbps Data rate Allows up to 128 transceivers on the bus -7 to +12V Common-mode input voltage range True fail-safe inputs Hot-swap input structure on DE Industrial Control Local Area Networks; Lighting Systems; Multimaster RS-485 Networks; PROFIBUS Applications; RS-422/RS-485 Communications Applications Communications & Networking, Lighting, Industrial Product Information Device Type: Transceiver IC Interface Type: RS485 No. of Drivers: 1Drivers No. of Receivers: 1Receivers Supply Voltage Min: 2.97V Supply Voltage Max: 3.63V Driver Case Style: SOIC No. of Pins: 8Pins Operating Temperature Min: -40°C Operating Temperature Max: 85°C Product Range: - Automotive Qualification Standard: - MSL: MSL 1 - Unlimited What's in the box 1 x Maxim Integrated (MAX3430ESA+) Transceiver RS485