Analog Devices (MAX13080EASD+) Transceiver RS422, RS485

Product Overview The MAX13080EASD+ is a ±15KV ESD protected, fail-safe, hot swap, +5V RS485/RS422 transceiver in 14 pin NSOIC package. The fail-safe circuitry in this device features a logic high receiver output when receiver input is open or shorted. The receiver outputs a logic high if all transmitters on a terminated bus are disabled (high impedance) and a hot swap capability to eliminate false transitions on the bus during power-up or hot insertion. This device has reduced slew rate drivers that minimize EMI and reduce reflections caused by improperly terminated cables allowing error free data transmission up to 250Kbps. It has a 1/8 unit load receiver input impedance which allows up to 256 transceivers on the bus. Supply voltage range from 4.5V to 5.5V Automotive temperature range from -40°C to 125°C One driver and one receiver Full duplex communication True fail-safe receiver while maintaining EIA/TIA-485 compatibility Hot swap input structures on DE and RE(complimentary) Low current shutdown mode Product Information Device Type: Transceiver IC Interface Type: RS422, RS485 No. of Drivers: 1Drivers No. of Receivers: 1Receivers Supply Voltage Min: 4.5V Supply Voltage Max: 5.5V Driver Case Style: NSOIC No. of Pins: 14Pins Operating Temperature Min: -40°C Operating Temperature Max: 125°C Product Range: - Automotive Qualification Standard: - MSL: MSL 1 - Unlimited IC Generic Number: MAX13080E