Ananlog Devices MAX489EPD+) Transceiver RS422, RS485, 4.75V-5.25V supply, 1 Driver, DIP-14

Product Overview The MAX489EPD+ is a low power, slew rate limited RS485/RS422 transceiver in 14 pin NSOIC package. It contains one driver and one receiver. This reduced slew rate driver minimizes EMI and reduces reflections caused by improperly terminated cables, thus allowing error free data transmission up to 250Kbps. The driver is short circuit current limited and is protected against excessive power dissipation by thermal shutdown circuitry that places the driver outputs into a high impedance state. It features fail-safe circuitry which has a logic high receiver output when the receiver input is open. Supply voltage range from 4.75V to 5.25V Operating temperature range from -40°C to 85°C Designed for full duplex communication Features receiver/driver enable function Quiescent current is 120µA Allows up to 32 transceivers on the bus Industrial-Control Local Area Networks; Level Translators; Low-Power RS-422 Transceivers; Low-Power RS-485 Transceivers; Transceivers for EMI-Sensitive Applications Applications Communications & Networking, Industrial Product Information Device Type: Transceiver IC Interface Type: RS422, RS485 No. of Drivers: 1Drivers No. of Receivers: 1Receivers Supply Voltage Min: 4.75V Supply Voltage Max: 5.25V Driver Case Style: DIP No. of Pins: 14Pins Operating Temperature Min: -40°C Operating Temperature Max: 85°C Product Range: - Automotive Qualification Standard: - MSL: MSL 1 - Unlimited IC Generic Number: MAX489E