Maxim Integrated (MAX3085CSA+T) Transceiver, RS422, RS485,

Product Overview The MAX3085CSA+T from Maxim Integrated Products is a fail-safe, slew rate limited RS485/RS422 transceiver in 8 pin NSOIC package. This high speed transceiver for RS485/RS422 communication contains one driver and one receiver. The fail-safe circuitry in this device features a logic high receiver output when receiver inputs are open or shorted, it means that the receiver output will be a logic high if all transmitters on a terminated bus are disabled (high impedance). This device offer higher driver output slew rate limits allowing transmit speed up to 500Kbps. It typically draws 375µA of supply current when unloaded or when fully loaded with the drivers disabled. It has a 1/8 unit load receiver input impedance that allows up to 256 transceivers on the bus. Typical applications include RS422/RS485 communications, level translators, transceivers for EMI sensitive applications and industrial control local area networks. Supply voltage range from 4.75V to 5.25V Operating temperature range from 0°C to 70°C Differential driver output (no load) of 5V Half duplex communication Low power shutdown mode with 0.001µA supply current Features receiver/driver enable function Industrial Control Local Area Networks; Level Translators; RS-422/RS-485 Communications; Transceivers for EMI-Sensitive Product Information Device Type: RS422 / RS485 Transceiver IC Interface Type: RS422, RS485 No. of Drivers: 1Drivers No. of Receivers: 1Receivers Supply Voltage Min: 4.75V Supply Voltage Max: 5.25V Driver Case Style: NSOIC No. of Pins: 8Pins Operating Temperature Min: 0°C Operating Temperature Max: 70°C Product Range: - Automotive Qualification Standard: - MSL: MSL 1 - Unlimited IC Generic Number: MAX3085