Maxim Integrated (MAX3162ECAI+) RS232/RS422/RS485 Transceiver, 2 Drivers,

Product Overview The MAX3162ECAI+ is a ±15KV ESD protected 3V to 5.5V, 10nA, RS232/RS485/ RS422 multiprotocol transceiver in 28 pin SSOP package. It is configured as a 2 transmitter/2 receiver RS232 interface and a single half-duplex RS485/RS422 transceiver simultaneously. It features enhanced electrostatic discharge (ESD) protection. The transmitter outputs and receiver inputs are protected to ±15KV using the Human Body Model. This device incorporate a low dropout transmitter output stage and an onboard dual charge pump to allow RS232 and RS485/RS422 compliant performance from a +3V to +5.5V supply. It also feature pin selectable transmitter slew rates for RS232 and RS485/RS422 modes. Slew rate limiting minimizes EMI and reduces reflections caused by improperly terminated cables allowing error free data transmission up to 250Kbps. Disabling slew rate limiting allows this device to transmit at data rates up to 10Mbps in RS485/RS422 mode and up to 1Mbps in RS232 mode. Allows up to 256 transceivers on the bus Operating temperature range from 0°C to 70°C Transmitters and receivers protected against wiring faults True fail-safe receiver prevents false transition on receiver input short or open Short circuit protection over the entire common mode voltage range Thermal protection from excessive power dissipation Integrated charge pump circuitry saves board space 1µA shutdown supply current saves power Product Information Device Type: Transceiver IC Interface Type: RS232, RS422, RS485 No. of Drivers: 2Drivers No. of Receivers: 2Receivers Supply Voltage Min: 3V Supply Voltage Max: 5.5V Driver Case Style: SSOP No. of Pins: 28Pins Operating Temperature Min: 0°C Operating Temperature Max: 70°C Product Range: - Automotive Qualification Standard: - MSL: MSL 1 - Unlimited IC Generic Number: MAX3162