Raspberry Pi CM3+ DEV. KIT Development Kit Complete I/O Interface

CM3+ DEV. KIT Development Kit, Raspberry Pi Compute Module 3+, BCM2837B0 SoC, Complete I/O Interface Features: The Compute Module 3 + Development Kit is a complete development platform for the Raspberry Pi Compute Module 3 +, providing all of the necessary interface ports to allow an engineer to design and test their own prototype applications with the CM3+. The modules simplify the design process engineers need to undertake when developing a System on Module (SoM) solution into their final product. Engineers do not need to concern themselves with the complexities of interfacing with the BCM2837B0 processor directly and instead can concentrate on designing the interfaces to their own I/O board and their application software . This simplicity fosters rapid development. A Raspberry Pi Compute Module I/O Board Camera Display Adaptor is included in the kit to connect a standard Raspberry Pi camera board or Raspberry Pi display to the Compute Module I/O Board. - Broadcom BCM2837B0 Cortex-A53 64-bit 1.2GHz SoC - 1GB LPDDR2 SDRAM Memory - 32GB eMMC flash memory storage on-board - 2 x CSI ports for camera boards - 2 x DSI ports for display boards - Full size HDMI port - Micro USB power connector Applications: Embedded Design & Development, Electronics Design, Industrial, IIoT (Industrial Internet of Things), IoT (Internet of Things) Specifications: - Silicon Manufacturer: Broadcom - Silicon Family Name: BCM2xxx - Core Architecture: ARM - Core Sub-Architecture: Cortex-A53 - Silicon Core Number: BCM2837B0 - Product Range: Compute Modules 3+