Traco Power (TMR 2411) Isolated Through Hole DC/DC Converter, 5V, 400mA

Isolated Through Hole DC/DC Converter, ITE, 2:1, 2 W, 1 Output, 5 V, 400 mA Product Information Power Supply Approvals: ITE Output Power Max: 2W Input Ratio: 2:1 Output Voltage - Output 1: 5V Output Current - Output 1: 400mA No. of Outputs: 1 Output Output Regulation: Regulated Isolation Voltage: 1.6kV Input Voltage DC Min: 18V Input Voltage DC Max: 36V DC / DC Converter Output Type: Fixed Input Voltage DC Nom: 24V DC / DC Converter Type: SIP DC / DC Converter Mounting: Through Hole Width: 9.2mm Height: 11.1mm Depth: 21.8mm Product Range: TMR 2 Series Product Overview TMR 2 series is a family of isolated 2W DC/DC converter modules with regulated output, featuring wide 2:1 input voltage ranges. The product comes in a compact SIP-8 plastic package with small footprint occupying only 2.0cm² (0.3square inch) of board space. An excellent efficiency allows -40° to +85°C operation temperatures. Further features include remote on/off control and continuous short circuit protection. The ultra-compact dimensions of these converters make them an ideal solution for many space critical applications in communication equipment, instrumentation and industrial electronics. High efficiency Excellent load and line regulation Indefinite short-circuit protection I/O isolation of 1600VDC 3-year product warranty EN 60950-1, EN 62368-1, IEC 60950-1, IEC 62368-1, UL 60950-1, UL 62368-1 safety standards Pollution degree PD 2, natural convection (20 LFM) cooling Switching frequency of 100KHz to 650KHz (RCC) Non-conductive plastic (UL 94 V-0 rated) housing, silicone (UL 94 V-0 rated) potting material PCB mount, THD (through-hole device) connection type