Antwire DC to DC 5V-50V Step Up Converter Adjustable

DC-DC 3.7-35V to 5V-50V Step Up Converter Booster Adjustable High Power Supply Module Boost Board MAX Output 50V 4A 5V 12V 24V Description: Performance parameters: 1. Input voltage: 3.7 ~ 35V DC (Note: It is recommended to be higher than 4.2V, higher than 6V with load capacity is stronger than 6V) 2, input current: 6A (max) 3, the output voltage: 3.7 ~ 50V DC (this board is the booster board, the output voltage should be > input voltage, the efficiency will be reduced when the output is higher than 40V) 4, the output current: 4A (max) 5, output power: 50W (max to enhance heat dissipation, it is recommended to work below 40W for a long time) 6, conversion efficiency: 96% (max) 7, output ripple: 40mV (TYP) 8, length x width x height = 49.3x25.7x14.1MM (length * width * height, with potentiometer) The following is the actual measured conversion data for the reference (not long working, maximum conversion efficiency, recommended for less than 40W for long hours): 3.7V to 5V 1A 84% 5V to 12V 1A 86.6% 12V to 19V 3A 93% (enhanced heat dissipation) 12V to 24V 2A 92.8% (enhanced heat dissipation) 12V to 32V 1.5A 91.7% (enhanced heat dissipation) 12V to 48V 1A 89.6% (enhanced heat dissipation) 24V to 32V 2A 96% (enhanced heat dissipation) 24V to 48V 1A 89.6% (enhanced heat dissipation) Note: There is no reverse protection, short circuit protection, please pay attention to clear the positive and negative input terminals, the correct connection of the module is to connect the power supply first, then adjust the output voltage and then connect the load! Package Include: 1PC * DC-DC 3.7-35V to 5V-50V Step Up Converter Booster Adjustable High Power Supply Module Boost Step-up Board MAX Output 50V 4A