5A CC&CV Buck Step-Down Power Module XL4015

Application: Lithium battery charger LED Driver Note: Do not combine connection of input GND and output GND Features: High power, high efficiency, 5A, low ripple; Three main functions: use as an ordinary step-down modules with overcurrent protection capabilities; as the value of various voltage lithium batteries, batteries, nickel-cadmium nickel-metal hydride batteries (battery) charger for solar panels, wind turbines and other occasions; used as high-power LED constant current driver module; Having a constant voltage and constant current modes, the indicator light indicates which mode is currently in the module; When used as a lithium battery charger, you can set the float voltage and charge current, it has a light finger It is shown being charged or has been filled; Current limiting protection, output short circuit will not even burn module. Parameters: Input: IN + input positive, IN- input negative Output way: OUT + output positive level, OUT- output negative Input Voltage: 4-38V Output voltage: 1.25-36V continuously adjustable Output current: adjustable, 5A Output Power: 75W maximum Operating temperature: -40 to + 85 degrees Operating frequency: 180KHz Conversion efficiency: up to 96% Short circuit protection: Yes (limited current 8A) Over temperature protection: (automatically shut off the output after overtemperature) Input reverse polarity protection: None, (as required in the input string into a large-current diode) Installation: four 3mm screws Connection: terminals or solder terminals, V-IN is the input, V-OUT output Module Size: Length 61.7mm Width 26.2mm height 15mm Weight: 25g