DC Boost Module 600W 10A

Boost module 600W high power, wide voltage input: the 10V ~~ 60V, Output adjustable 12V ~~ 80V wide voltage; adjustable output current; ultra-low dropout. Detailed parameters: Input voltage: 10V-60V Input Current: Maximum input current 15A Output voltage: 12V-80V continuously adjustable Output current: maximum output current of 10A (adjustable) Output power: effective power P = input voltage V * 10A Conversion efficiency: up to 95% (input voltage and current; conversion efficiency of the output voltage, current impact) Short-circuit protection: fuse Installation size: W63 * L85mm * H65mm Mechanics: Custom Radiator Specifications: Radiator floor thickness 5mm, tooth height 21mm, length 85mm, width 63mm Module fixed above the radiator, radiator and boost board are integrated design, this is very user-friendly to allow direct use Only long screws are needed to mount in your system. Electronics: Inductor magnetic ring use bead of 27mm Sendust, 1mm double wire wound inductors, high-quality filter capacitor, input a 1000uF63V electrolytic capacitors, and output two 470uF100V electrolytic capacitors On-board power supply switch, power indicator, voltage regulation, current adjustment potentiometer so that the output is more convenient You can always adjust the output voltage, the current size of the input and output using 8500 terminals, through the current ability to ensure a long time reliable. Applications: DIY an output adjustable vehicle power supply, only need 12V power input access, output voltage (14V-80V) free and continuous adjustment of the output voltage can not be lower than the input voltage. Universal car laptop power supply. 12V power input connected to the output regulation voltage notebook need to work. Boost charger, 12V power higher than 12V battery charging, for example, for 24V battery, and charging current can be adjusted. Powered electronic equipment, as long as the voltage is adjusted to the desired voltage and current does not exceed the rated current can work properly. System level power supply before, when design a project, input is 10V-18V, but system board needs about 24V of power and a great power, general DC-DC module power is too small, then the module will be your most good choice, no need to debug and work directly on the machine, easily enable high-efficiency high-power boost. Used for on-vehicle usage, portable battery or as a laptop power adapter.