Microchip (MRF24J40MA-I/RM) RF Transceiver Radio Module, 250Kbps

RF Transceiver Radio Module, 250Kbps, PCB Antenna, 2.483 GHz Product Overview The MRF24J40MA is +0 dBm PICDEM Z 2.4GHz IEEE 802.15.4 radio transceiver module. The MRF24J40MA has an integrated PCB antenna, matching circuitry, and supports the ZigBee™, MiWi™ and MiWi™ P2P protocols. The module is attached to the carrier board with a 12-pin modular connector allowing the RF Board to be used with the current PICDEM Z development kit or as a production module to wirelessly enable customer designs. The MRF24J40MA module can connect to many popular Microchip PIC® microcontrollers and is an ideal solution for wireless sensor networks, home automation, building automation and consumer applications. The MRF24J40MA module operates in the non-licensed 2.4 GHz frequency band and is FCC, IC and ETSI compliant. The integrated module design frees the integrator from extensive RF and antenna design, and regulatory compliance testing, allowing quicker time to market. IEEE Std. 802.15.4™ Compliant RF Transceiver Supports ZigBee®, MiWi™, MiWi™ P2P and proprietary wireless networking protocols Simple four-wire SPI interface to PIC® microcontroller Integrated 20 MHz and 32.768 kHz oscillator drive Low current consumption Hardware CSMA-CA Mechanism Hardware security engine (AES-128) Up to 400 ft. range FCC (USA), IC (Canade), ETSI (Europe) Certified Hardware Security Engine (AES-128) with CTR, CCM and CBC-MAC modes Applications Wireless, Security, Building Automation, Consumer Electronics, Consumer Electronics Product Information RF Modulation: DSSS Data Rate Max: 250Kbps Frequency Max: 2.483GHz Sensitivity dBm: -94dBm Supply Voltage Min: 2.4V Supply Voltage Max: 3.6V Module Interface: 4 Wire, SPI Supply Current: 23mA Product Range: -