Laird Connectivity (ST60-2230C) Wireless LAN Module, 2.4 GHz,

Wireless LAN Module, 2.4 GHz, SDIO, UART, USB, Industrial, Medical Product Information Frequency RF: 2.4GHz Module Interface: SDIO, UART, USB Module Applications: Industrial, Medical Product Range: - General Description The 60-2230C module is a dual band 2x2 802.11ac WLAN plus Bluetooth 4.2 dual mode adapter; it complies with M.2 2230 E-Key standard. The module provides both simultaneous and independent operation of the following: ▪ IEEE 802.11ac (Wave 2), 2x2 receive Multi-User MIMO spatial stream multiplexing with data rates up to MCS9 (866.7 Mbps) ▪ Bluetooth (Class 1 and Class 2) ▪ Bluetooth 4.2 (with Low Energy or LE) ▪ Bluetooth 5 Ready ▪ Bluetooth Smart Ready operation ▪ Three-way coexistence for WLAN and Bluetooth Internal coexistence arbitration and a Mobile Wireless System (MWS) serial transport interface provide the functionality for connecting an external Long Term Evolution (LTE). The module integrates all WLAN and Bluetooth functionality into a single package which supports low-cost and simple implementation along with flexibility for platform-specific customization. In addition, it has low power consumption radio architecture and proprietary power save technologies to extended battery life. On the DFS engine, the module supports 802.11h Dynamic Frequency Selection to detect the presence of radar signals; support is extended to 80 MHz mode under the 802.11ac channelization modes. In addition, the E DFS (Enhanced DFS) scheme is designed to increase pulse detection rates for shorter (0.5 us, 0.8 us, 1 us), in-band DFS pulses. The scheme is designed to minimize the false-alarm rate for out-of-band DFS pulse. There are two interfaces for WLAN function: ▪ SDIO 3.0 – Supports both 1-bit SDIO and 4-bit SDIO transfer modes at full clock range up to 208 MHz ▪ USB 2.0 In addition, there are three interfaces for Bluetooth function: ▪ SDIO ▪ USB 2.0 ▪ High-Speed UART