Microchip (MCP4821-E/P) Digital to Analogue Converter, 12 bit, 3 Wire

Digital to Analogue Converter, 12 bit, 3 Wire, Serial, 2.7V to 5.5V, DIP, 8 Pins Product Overview The MCP4821-E/P is a 12-bit 1-channel 12-bit Digital-to-Analogue Converter with internal voltage reference. This device offers high accuracy and low power consumption. Communication with the device is accomplished via a simple serial interface using SPI protocols. This device provides very high accuracy and low noise performance is suitable for applications, such as set point control, offset adjustment and sensor calibration applications. Single channel voltage output 330µA (typical) Operating current 2.048V Internal voltage reference Selectable unity or 2x gain output INL ±2 LSB (typical) DNL ±0.75 LSB Maximum 4.5µs Output settling time SPI interface Rail-to-rail output Simultaneous latching of the DAC output with LDAC pin 50ppm/°C VREF Temperature coefficient Applications Power Management, Communications & Networking, Consumer Electronics, Industrial, Sensing & Instrumentation, Portable Devices, Automotive Product Information Resolution (Bits): 12bit Sampling Rate: - Supply Voltage Range: 2.7V to 5.5V ADC / DAC Case Style: DIP No. of Pins: 8Pins Input Channel Type: Serial Data Interface: 3 Wire, Serial Operating Temperature Min: -40°C Operating Temperature Max: 125°C Product Range: -