Analog Devices (MAX4040EUK+T) Operational Amplifier, Micropower

Operational Amplifier, Micropower, Rail to Rail I/O, 1 Amplifier, 90 kHz, 40 V/ms Product Overview The MAX4040EUK+T is a single, low cost, micropower rail to rail I/O op-amp in 5 pin SOT-23 package. This amplifier provides a 90KHz gain bandwidth product while using only 10µA of supply current per amplifier. The combination of low voltage operation, rail to rail inputs and outputs and ultra low power consumption makes this device ideal for any portable/battery powered system. This amplifier has outputs that typically swing to within 10mV of the rails with a 100Kohm load. The rail to rail input and output characteristics allow the full power supply voltage to be used for signal range. The combination of low input offset voltage, low input bias current and high open-loop gain makes it suitable for low power/ low voltage precision applications. Supply voltage range is ±1.2V to ±2.75V, 2.4V to 5.5V Operating temperature range from -40°C to 85°C No phase reversal for overdriven inputs Input offset voltage is 200µV Unity gain stable for capacitive loads up to 200pF Outputs swing rail to rail Applications Signal Processing, Portable Devices Product Information No. of Amplifiers: 1 Amplifier Bandwidth: 90kHz Slew Rate: 40V/ms Supply Voltage Range: ± 1.2V to ± 2.75V, 2.4V to 5.5V Amplifier Case Style: SOT-23 No. of Pins: 5Pins Operating Temperature Min: -40°C Operating Temperature Max: 85°C MSL: MSL 1 - Unlimited