Analog Devices (MAX4462HEUT+T) Instrument Amplifier, RR O/P, 1 Amplifier

Instrument Amplifier, RR O/P, 1 Amplifier, 100 µV, 0.5 V/µs, 2.5 MHz, 2.85V to 5.25V, SOT-23 Product Overview The MAX4462HEUT+T from Maxim Integrated Products is a 3V/5V, single supply, rail to rail instrumentation amplifier in 6 pin SOT-23 package. Instrumentation amplifier with precision specifications, low-power consumption and excellent gain bandwidth product. Proprietary design techniques allow ground-sensing capability combined with ultra-low input current and increased common-mode rejection performance. This rail-to-rail output amplifier is offered in fixed gains of 100 and has a reference input pin (REF). REF sets the output voltage for zero differential input to allow bipolar signals in single-supply applications. Also has high-impedance inputs optimized for small-signal differential voltages. Typically used at industrial process control, strain-gauge amplifiers, transducer interface, precision low-side current sense, low-noise microphone preamplifier, differential voltage amplification and battery powered medical equipment. 2.85V to 5.25V single supply Operating temperature range from -40°C to +85°C Input negative rail sensing 1pA (typ) input bias current ±100µV input offset voltage 0.8mA at VDD = 5V, VDIFF = 0V, 0.68mA at VDD = 3V, VDIFF = 0V supply current 0.15% gain error 2.5MHz gain bandwidth product 18nV/√Hz at f = 10KHz input referred noise Applications Signal Processing, Portable Devices, Industrial, Medical Product Information No. of Amplifiers: 1 Amplifier Input Offset Voltage: 100µV Slew Rate: 0.5V/µs Bandwidth: 2.5MHz Supply Voltage Range: 2.85V to 5.25V Amplifier Case Style: SOT-23 No. of Pins: 6Pins Amplifier Output: Rail to Rail CMRR: 120dB Operating Temperature Min: -40°C Operating Temperature Max: 85°C MSL: MSL 1 - Unlimited