Microchip (MCP6564-E/SL) Analogue Comparator, Quad, High Speed

Analogue Comparator, Quad, High Speed, 4 Comparators, 49 ns, 1.8V to 5.5V, SOIC, 14 Pins Product Overview The MCP6564-E/SL is a low-power push-pull output Comparator with quad configurations. This comparator is optimized for low power 1.8V, single-supply applications with greater than rail-to-rail input operation. The internal input hysteresis eliminates output switching due to internal input noise voltage, reducing current draw. The push-pull output of the MCP6564 family supports rail-to-rail output swing and interfaces with CMOS/TTL logic. The output toggle frequency can reach a typical of 4MHz typical while limiting supply current surges and dynamic power consumption during switching. This family operates with single supply voltage of 1.8 to 5.5V while drawing less than 100µA/comparator of quiescent current typical. 100µA Low quiescent current ±3mV Input offset voltage Microchip advanced part selector Analogue demonstration and evaluation boards Applications Automotive, Consumer Electronics, Portable Devices, Clock & Timing, Security, Communications & Networking, Sensing & Instrumentation Product Information Comparator Type: High Speed No. of Comparators: 4 Comparators Response Time: 49ns Supply Voltage Range: 1.8V to 5.5V Comparator Case Style: SOIC No. of Pins: 14Pins IC Output Type: CMOS, Push Pull, TTL Operating Temperature Min: -40°C Operating Temperature Max: 125°C MSL: MSL 1 - Unlimited