Vishay (DG408DY-E3) 8:1 Analog Multiplexer IC, Dual, 40 ohm,

8:1 Analog Multiplexer IC, Dual, 40 ohm, ± 5V to ± 20V, SOIC-16 Product Overview The DG408DY-E3 is a 8-channel single-ended Analog Multiplexer designed to connect one of eight inputs to a common output as determined by a 3-bit binary address (A0, A1, A2). Break-before-make switching action protects against momentary crosstalk between adjacent channels. An on channel conducts current equally well in both directions. In the off state each channel blocks voltages up to the power supply rails. An enable (EN) function allows the user to reset the multiplexer/demultiplexer to all switches off for stacking several devices. All control inputs, address (Ax) and enable (EN) are TTL compatible over the full specified operating temperature range. Designed in the 44V silicon-gate CMOS process, the absolute maximum voltage rating is extended to 44V. Additionally, single supply operation is also allowed. An epitaxial layer prevents latchup. 20pC Low charge injection 160ns Fast transition time 10µA Low power supply Reduced switching errors Reduced glitching Improved data throughput Reduced power consumption Increased ruggedness Applications Signal Processing, Avionics, Sensing & Instrumentation, Medical, Power Management Product Information Multiplexer Configuration: 8:1 No. of Circuits: 1Circuits On State Resistance Max: 100ohm Supply Voltage Range: ± 5V to ± 20V Analogue Multiplexer Case: SOIC No. of Pins: 16Pins Operating Temperature Min: -45°C Operating Temperature Max: 85°C