Tdk Invensense (MPU-6050) MEMS Module, MotionTracking Series

MEMS Module, MotionTracking Series, 3-Axis Gyroscope/Accelerometer, ±16g, 2.375 V to 3.46 V, QFN-24 Product Overview The MPU-6050 incorporates InvenSense's MotionFusion and run-time calibration firmware that enables manufacturers to eliminate the costly and complex selection, qualification, and system level integration of discrete devices in motion-enabled products, and guarantees that sensor fusion algorithms and calibration procedures deliver optimal performance for consumers. The MPU-6050 device combines a 3-axis gyroscope and a 3-axis accelerometer on the same silicon die together with an onboard Digital Motion Processor (DMP) capable of processing complex 9-axis MotionFusion algorithms. The parts' integrated 9-axis MotionFusion algorithms access external magnetometers or other sensors through an auxiliary master I2C bus, allowing the devices to gather a full set of sensor data without intervention from the system processor. User-programmable digital filters for gyroscope, accelerometer, and temp sensor Digital-output temperature sensor 9-Axis MotionFusion by the on-chip digital motion processor (DMP) Auxiliary master I2C bus for reading data from external sensors Minimal cross-axis sensitivity between the accelerometer and gyroscope axes MEMS structure hermetically sealed and bonded at wafer level 10,000 g shock tolerant 400kHz fast mode I2C for communicating with all registers Applications Consumer Electronics, Sensing & Instrumentation, Automation & Process Control, System Monitoring, Robotics Product Information MEMS Module Function: Tri-Axis Gyroscope, Tri-Axis Accelerometer Supply Voltage Min: 2.5V Supply Voltage Max: 3.6V Sensor Case Style: QFN No. of Pins: 24Pins Gyroscope Range: ± 250°/s, ± 500°/s, ± 1000°/s, ± 2000°/s Acceleration Range: ± 2g, ± 4g, ± 8g, ± 16g MSL: MSL 3 - 168 hours