Allegro Microsystems (ACS758ECB-200B-PFF-T) Current Sensor, 10 mA, 120 kHz

Current Sensor, Current Conductor, 10 mA, 120 kHz, PFF, 5 Pins, 3 V, 5.5 V Product Overview The ACS758ECB-200B-PFF-T is a thermally enhanced, fully integrated, hall effect based linear current sensor IC in 5 pin CB package with PFF lead form. This IC provides economical and precise solutions for AC or DC current sensing. It consists of precision, low offset linear hall circuit with copper conduction path located near die. The current flowing through this copper conduction path generates a magnetic field which hall IC converts into a proportional voltage. Device accuracy is optimized through close proximity of magnetic signal to hall transducer. A precise and proportional output voltage is provided by low offset, chopper stabilized BiCMOS hall IC which is programmed for accuracy at factory. High level immunity to current conductor dV/dt and stray electric fields offered by Allegro proprietary integrated shield technology provides low output voltage ripple and low offset drift in high side and high voltage applications. This device is CB, UL E316429, CE and TUV approved. Primary sampled current (Ip) of ±200A Sensitivity is 10mV/A Current directionality is bidirectional Automotive grade AEC Q-100 qualified Ultra low power loss, 100µohm internal conductor resistance Single supply operation from 3V to 5.5V 120KHz typical bandwidth 3µs output rise time in response to step input current Output voltage proportional to AC or DC currents Operating temperature range from -40°C to 85°C Applications Sensing & Instrumentation, Motor Drive & Control, Power Management, Automotive Product Information Quiescent Current: 10mA Bandwidth: 120kHz Sensor Case Style: PFF No. of Pins: 5Pins Supply Voltage Min: 3V Supply Voltage Max: 5.5V Operating Temperature Min: -40°C Operating Temperature Max: 85°C Product Range: ACS758